Galvanic zinc coatings and three-line technology available, which operates a series of savas- while two rows of basic technology. The after-treatment of zinc - in the case of all three lines - only (ROHS compliant) passziválókat containing trivalent chromium compounds (blue, yellow, black) are used.
Acidic zinc line: zinc separation is performed weakly acidic electrolyte. After-treatment of the coating is provided with blue and yellow passivation layers, which are already fully satisfy the requirements of the food and also the automotive industry. If necessary, it is possible to so-called thick (blue) passivation and application of paint on surfaces, which can greatly help to increase the corrosion resistance. Up to 600 hours salt spray we can reach-resistance even in case of a combination of these!
The technological line horganyozható the largest size: 1900 x 950 x 300th
Alkaline zinc series I .: separation of the zinc alkaline (pH ~ 13) medium done, with two automatic mode crane. The alkaline bath exhibits a highly uniform distribution of scattering image, which makes easier to satisfy the demand of partners, not just the minimum film thickness, but also the maximum horganyvastagság prescribed whereby. The alkaline baths thanks to the aesthetic improvements have been no different in appearance from the acid bath. The line for the galvanic isolation of zinc, CrVI-free passivation blue and black are available.
The technological line horganyozható the largest size: 2900 x 950 x 500th
Alkaline zinc .: disconnecting the line II zinc alkaline (pH ~ 13) medium done using manual operation of cranes, suspended for the time being only mode, but there is a plan tömeghorganyozásra also suitable for installation drum. Alkaline bath used in the line shows a very even spray distribution image, which makes easier to satisfy the demand of partners, not just the minimum film thickness, but also the maximum horganyvastagság prescribed whereby. The all-new spa not only reached, but even exceeded the acid bath from the usual brilliance. The galvanically isolated to protect ROHS adequate zinc, yellow and black passivation used.
The technological line horganyozható the largest size: 1350 x 850 x 350th
The zinc coating can be used in many areas of the industry such as: engineering, construction, automotive, etc.
We are at existing and potential partners available to their requests for quotations by fax or e-mail us send us a drawing and / or exact size, or the surface material to be treated. the specification of surface treatment. We are prepared to offer at short notice, respectively. samples are required to undertake in ratings surface treatment free of charge.